If you are looking for something very exceptional to cut various materials in shapes, then nothing can be better than a Jig Saw. Yes! All that you need is just a mere blade and you are very much set to go. But to use
But to use jig saw, you need to know few things about it. Don’t worry! Here you will get to see how to use this awesome and powerful tool for cutting intricate shapes. So let’s begin with how to use a Jig saw.
Here are the steps to be followed:
Select a jigsaw suitable for your project:
Well! For your knowledge there are different features that you must be aware of about a jig saw. If you are looking for a portable one then, battery operated jig saw is the one for you.
However, those are heavier than the cords one. You can choose scrolling saws that allows you to rotate the blade without rotating the whole saw. So before starting with the work, you should focus on which jig saw to use. There are many other variations such as pivot base
So before starting with the work, you should focus on which jig saw to use. There are many other variations such as pivot base jig saws, amperage etc.
Select the correct blade for the material you are going to cut: Now it
Now it is turn to select the correct blade to make your job easy. Try to choose that one which can easily cut down any material from stainless steel sheet to plywood.
Check for certain things while choosing the right blade, such as, width, blade composition etc.
You might also like to read: Best Compact Thickness Planer
Prepare your work piece for your cut:
Once you are done with the choosing of right jig saw and blade, you can start off with the project.
The first step will be to prepare your work piece for the cut. Take a hold off all the materials and keep it aside so as to make the work easy.
Measure and mark the cut line you need for your project:
The very next step after preparing the work piece is to do some measurement work. Make a measurement of the work piece and mark it the way you want to give it a shape and then take it further for cutting.
In order to be more accurate while cutting into the proper shape you can create a base template also.
Clamping: The next step will be to clamp the work piece or the material in order to make the work easy or fastened.
Make sure you have sufficient light to see your cutting marks easily:
While working with a jig saw, make sure you are working at a place where there is sufficient light which will help you in avoiding any mistake or wrong cuts. It is also considered as a safety measure.
Dusting and Cutting:
Last thing to do is cutting the work piece in the desired shape and then after that to clean the dust around the material. Don’t give too much pressure while taking out the blade as it may choke or break down the work piece.